المتجر | الحر لمستلزمات الصيد والرحلات

FILTERS

Total Products: 5817

Spyderco Delica 4 Folding Knife 2-7/8" VG10 Satin Plain Blade #C11P Successfully added to your cart Continue Shopping Process Checkout New Spyderco Delica 4 Folding Knife 2-7/8" VG10 Satin Plain Blade #C11P 585.00 AED ~~585.00 AED~~ 585.0 AED C11P Delica 4 Stainless Steel, Plain Edge - The stainless Delica 4 fills your palm with a handful of steel yet doesn't seem weighty or unwieldy. Knife Knuts who prefer something heavier and stouter seem to gravitate to steel handled knives. Since the handle surface is flat and smooth it offers an ideal palette for engraving or personalizing your knife. As part of Spyderco’s CQI™ (Constant Quality Improvement) philosophy the C10SS now offers improved ergonomics – added to the blade’s spine is slip resistant jimping, a larger thumb hole, a stronger thicker tip and a new 4-way clip design (R/L reversible & Tip-up/Tip-down). The hollow-ground blade has been upgraded to VG-10 and is available in a PlainEdge, SpyderEdge, or CombinationEdge configuration. Saber ground VG-10 stainless steel blade Stainless steel handle ideal for embelishing Closed Length (Inches): 4.2, Overall Length (Inches): 7.15, Blade Length (Inches):2.95, Blade Steel: VG-10, Grind: Hollow Spyderco Delica 4 Folding Knife 2-7/8" VG10 Satin Plain Blade #C11P Quick-View	Spyderco Sage 5 Lightweight Maxamet Satin Blade #C123PGY Successfully added to your cart Continue Shopping Process Checkout New Spyderco Sage 5 Lightweight Maxamet Satin Blade #C123PGY 1,265.00 AED ~~1,265.00 AED~~ 1265.0 AED High Performance - The Sage 5 showcases the Carpenter Technology Micro-Melt Maxamet which is an extraordinary tool steel that was specially formulated to roll red-hot steel billets in Carpenters steel mills. Light and Durable - Its finely tuned ergonomics reduce fatigue during prolonged use and a deep Bi-Directional texturing pattern ensures a secure grip in even the most challenging conditions. Dependable - It showcases this incredibly hard, ultra-tough material in its full-flat-ground blade and with a reversible deep-pocket wire pocket clip. Versatile - It is an extremely capable all-purpose cutting tool with skeletonized Stainless Steel liners with a high-strength compression Lock, and injection-molded fiberglass-reinforced-nylon (FRN) scales. Spyderco Sage 5 Lightweight Maxamet Satin Blade #C123PGY Quick-View	Spyderco Chicago CTS-BD1N Satin Plain Blade, Black G10 Handles, Liner Lock #C130GP Successfully added to your cart Continue Shopping Process Checkout New Spyderco Chicago CTS-BD1N Satin Plain Blade, Black G10 Handles, Liner Lock #C130GP 375.00 AED ~~375.00 AED~~ 375.0 AED Whether necessary, good, or just nutty, they're intended to establish order and ward-off chaos. When our government and society implement rules we do our best to live within their parameters. As an example, many U.S. metropolitan cities draw the line for carrying pocketknives in public to knives with blades two-inches in length or under. Welcome to Chicago! If I were a Chicagoan and carried a pocketknife regularly, I might be inclined (as a law abiding citizen) to carry a tool falling under this city's restriction. The Spyderco C130G Chicago is just that. Two-inches of flat ground CTS BD1N blade urbanely outfitted with black G-10 handle scales and Michael Walker LinerLock®. The handle is shaped and sized ergonomically with full-length skeletonized liners inside for strength without bulk or weight. Its leaf-like shaped blade effectively cuts across the board, from significant strenuous cuts like carpet and poly rope to something as simple as fingernail cleaning or scraping tape off of glass. A deep pocket clip burrows the knife down into a pant's pocket with the tip facing up ready to carry left- or right-handed. This one is for Chicagoans or anyone looking for a city/suit knife. Spyderco Chicago CTS-BD1N Satin Plain Blade, Black G10 Handles, Liner Lock #C130GP Quick-View	Spyderco Bug Micro-Size Slipjoint 2C27 Satin Plain Blade, Black G10 Handles #C133GBKP Successfully added to your cart Continue Shopping Process Checkout New Spyderco Bug Micro-Size Slipjoint 2C27 Satin Plain Blade, Black G10 Handles #C133GBKP 145.00 AED ~~145.00 AED~~ 145.0 AED Spyderco’s micro-sized slipjoint pocketknives are far more than novelties. Despite their compact size, they are fully functional, impressively sharp, and, thanks to the Trademark Round Hole in their blades, easier to open than knives with traditional nail nicks. Previously offered only with stainless steel handles, the popular Bug, Honeybee, and Grasshopper designs are now available with G10 scales in three colors. The peel-ply textured scales provide enhanced grip and come in black, red, and blue. Each knife features a razor-sharp, full-flat-ground blade crafted from Sandvik 12C27 stainless steel. Specifications Blade Length: 1.27" (32 mm) Cutting Edge: 1.14" (29 mm) Closed Length: 1.68" (43 mm) Overall Length: 2.94" (75 mm) Blade Material: Sandvik 12C27 Stainless Steel Blade Thickness: 0.071" (1.8 mm) Blade Style: Leaf Shaped Blade Grind: Full-Flat Blade Finish: Satin Handle Material: Black G10 Locking Mechanism: Slipjoint (non-locking) Weight: 0.30 oz. (7 g) Made in China Spyderco Bug Micro-Size Slipjoint 2C27 Satin Plain Blade, Black G10 Handles #C133GBKP Quick-View
Spyderco Bug Micro-Size Slipjoint 2C27 Satin Plain Blade, Blue G10 Handles #C133GBLP Successfully added to your cart Continue Shopping Process Checkout Spyderco Bug Micro-Size Slipjoint 2C27 Satin Plain Blade, Blue G10 Handles #C133GBLP 145.00 AED ~~145.00 AED~~ 145.0 AED Spyderco’s micro-sized slipjoint pocketknives are far more than novelties. Despite their compact size, they are fully functional, impressively sharp, and, thanks to the Trademark Round Hole in their blades, easier to open than knives with traditional nail nicks. Previously offered only with stainless steel handles, the popular Bug, Honeybee, and Grasshopper designs are now available with G10 scales in three colors. The peel-ply textured scales provide enhanced grip and come in black, red, and blue. Each knife features a razor-sharp, full-flat-ground blade crafted from Sandvik 12C27 stainless steel. Spyderco Bug Micro-Size Slipjoint 2C27 Satin Plain Blade, Blue G10 Handles #C133GBLP Quick-View	Spyderco Bug Micro-Size Slipjoint 2C27 Satin Plain Blade, Red G10 Handles #C133GRDP Successfully added to your cart Continue Shopping Process Checkout New Spyderco Bug Micro-Size Slipjoint 2C27 Satin Plain Blade, Red G10 Handles #C133GRDP 145.00 AED ~~145.00 AED~~ 145.0 AED Spyderco’s micro-sized slipjoint pocketknives are far more than novelties. Despite their compact size, they are fully functional, impressively sharp, and, thanks to the Trademark Round Hole in their blades, easier to open than knives with traditional nail nicks. Previously offered only with stainless steel handles, the popular Bug, Honeybee, and Grasshopper designs are now available with G10 scales in three colors. The peel-ply textured scales provide enhanced grip and come in black, red, and blue. Each knife features a razor-sharp, full-flat-ground blade crafted from Sandvik 12C27 stainless steel. Specifications Blade Length: 1.27" (32 mm) Cutting Edge: 1.14" (29 mm) Closed Length: 1.68" (43 mm) Overall Length: 2.94" (75 mm) Blade Material: Sandvik 12C27 Stainless Steel Blade Thickness: 0.071" (1.8 mm) Blade Style: Leaf Shaped Blade Grind: Full-Flat Blade Finish: Satin Handle Material: Red G10 Locking Mechanism: Slipjoint (non-locking) Weight: 0.30 oz. (7 g) Made in China Spyderco Bug Micro-Size Slipjoint 2C27 Satin Plain Blade, Red G10 Handles #C133GRDP Quick-View	Spyderco Persistence Lightweight Black FRN Handles, Liner Lock #C136PBBK Successfully added to your cart Continue Shopping Process Checkout New Spyderco Persistence Lightweight Black FRN Handles, Liner Lock #C136PBBK 290.00 AED ~~290.00 AED~~ 290.0 AED Since Spyderco made their first groundbreaking CLIP-IT knife more than 40 years ago, Spyderco's focus has always been to make the absolute best cutting tools possible. They know that serious knife users appreciate quality and performance and are willing to invest in premium products. However, they also understand that becoming a serious knife user is a process. We all have to start somewhere, and until we have enough experience to appreciate quality, that typically means starting with lower-priced knives. For that reason, Spyderco created their Value Folders. The goal of the Value Folder family was to showcase all the defining characteristics of a Spyderco CLIP-IT in a budget-friendly form. This would allow novice knife users to experience the swift, ambidextrous opening of Spyderco's Trademark Round Hole, the convenient carry and instant access of the pocket clip, and the enhanced cutting performance of a blade with exceptional edge geometry. That firsthand experience would enable them to appreciate those features and guide them toward becoming savvy, well-seasoned knife users. For folks who already appreciated the advantages of the CLIP-IT platform, Value Folders also represented affordably priced "beater" knives, "loaner" knives for co-workers, and the perfect gifts for aspiring knife enthusiasts. The original Value Folder—and still the flagship of the family—was the Tenacious. It set the standard for the series, featuring a full-flat-ground 8Cr13MoV blade, full skeletonized stainless steel liners, a sturdy LinerLock mechanism, an easily cleaned, open-backed construction style, peel-ply-textured G10 scales, and a fully configurable four-position pocket clip. Although it was the perfect "starter" knife for a generation of Spyderco fans, for some users' needs, it was just a little too big. To address that concern, the Persistence was created. The Persistence About 11% smaller than the Tenacious, the Persistence was designed to provide the same affordable convenience, versatility, and strength, but in a more compact format. Ideal for smaller hands and carry in jurisdictions that limit the legal blade length to less than three inches, it provides an exceptional balance of convenience and full-service cutting performance. Introduced in 2009, the original version of the Persistence faithfully offers the same key features of the Tenacious, including full, skeletonized stainless steel liners, peel-ply-textured G10 scales, a secure LinerLock mechanism, and a four-position clip that supports left or right-side, tip-up or tip-down carry. Its blade is precision machined from 8Cr13MoV stainless steel—a durable, reliable blade steel that provides an excellent balance of cutting performance, corrosion resistance, and ease of sharpening. Its high, full-flat grind creates impressive edge geometry for low-friction cutting efficiency and, unlike most Spyderco folders, its edge extends all the way to the handle. The minimal ricasso (the unbeveled area of the blade nearest the handle) and lack of an index-finger choil provide a full-length cutting edge, superior control when using the "heel" of the blade, and exceptional cutting power when the full length of the edge is brought into play. Persistence Lightweight To make the Persistence even more affordable and versatile—and following in the footsteps of the Tenacious and Resilience models—Spyderco is proud to introduce a lightweight version of the design with injection-molded fiberglass-reinforced-nylon (FRN) scales. Molded with Spyderco's signature Bi-Directional Texture pattern, the lightweight scales provide enhanced grip security and reduce the overall weight of the knife by almost 10%. All other features are faithfully consistent with the original G10-handled version with the exception of the edge options. While the original Persistence is only available with a PlainEdge blade, the Lightweight will offer a choice of PlainEdge, CombinationEdge, and fully serrated SpyderEdge. Astute Spyderco fans may recall that the Persistence Lightweight announcement in Reveal 9 specified only PlainEdge and CombinationEdge; however, Spyderco recently confirmed that their manufacturing partner will also be able to provide a SpyderEdge version as well. For tactical end users and those who just prefer the look of basic black, the Persistence Lightweight will also be made in an all-black version with a black oxide blade coating and black-coated liners and handle hardware. Like its satin-finished counterpart, the all-black version will be available in all three edge configurations. The Persistence and Persistence Lightweight offers an exceptional balance of performance and value. Whether you are a neophyte or a seasoned knife user, we are confident they will not only meet your needs but will exceed your expectations. Specifications Blade Length: 2.77" (70 mm) Cutting Edge: 2.77" (70 mm) Overall Length: 6.9" (175 mm) Closed Length: 4.13" (105 mm) Blade Material: 8CR13MoV Stainless Steel Blade Thickness: 0.122" (3.1 mm) Blade Finish: Black Blade Edge: Plain Handle Material: Black FRN Locking Mechanism: Liner Lock Weight: 3.3 oz. (94 g) Pocket Clip: 4-Way; Tip-Up/Tip Down; Left/Right Carry Made in China Spyderco Persistence Lightweight Black FRN Handles, Liner Lock #C136PBBK Quick-View	Spyderco HoneyBee Micro-Size Slipjoint Black G10 Handles #C137GBKP Successfully added to your cart Continue Shopping Process Checkout Spyderco HoneyBee Micro-Size Slipjoint Black G10 Handles #C137GBKP 160.00 AED ~~160.00 AED~~ 160.0 AED Spyderco’s micro-sized slipjoint pocketknives are far more than novelties. Despite their compact size, they are fully functional, impressively sharp, and, thanks to the Trademark Round Hole in their blades, easier to open than knives with traditional nail nicks. Previously offered only with stainless steel handles, the popular Bug, Honeybee, and Grasshopper designs are now available with G10 scales in three colors. The peel-ply textured scales provide enhanced grip and come in black, red, and blue. Each knife features a razor-sharp, full-flat-ground blade crafted from Sandvik 12C27 stainless steel. Specifications Blade Length: 1.67" (42 mm) Cutting Edge: 1.48" (38 mm) Closed Length: 2.06" (52 mm) Overall Length: 3.71" (94 mm) Blade Material: Sandvik 12C27 Stainless Steel Blade Thickness: 0.063" (1.6 mm) Blade Style: Drop Point Blade Grind: Full Flat Blade Finish: Satin Handle Material: Black G10 Locking Mechanism: Slipjoint Pocket Clip: None Weight: 0.40 oz. (10 g) Made in China Spyderco HoneyBee Micro-Size Slipjoint Black G10 Handles #C137GBKP Quick-View
Spyderco HoneyBee Micro-Size Slipjoint Blue G10 Handles #C137GBLP Successfully added to your cart Continue Shopping Process Checkout Spyderco HoneyBee Micro-Size Slipjoint Blue G10 Handles #C137GBLP 160.00 AED ~~160.00 AED~~ 160.0 AED Spyderco’s micro-sized slipjoint pocketknives are far more than novelties. Despite their compact size, they are fully functional, impressively sharp, and, thanks to the Trademark Round Hole in their blades, easier to open than knives with traditional nail nicks. Previously offered only with stainless steel handles, the popular Bug, Honeybee, and Grasshopper designs are now available with G10 scales in three colors. The peel-ply textured scales provide enhanced grip and come in black, red, and blue. Each knife features a razor-sharp, full-flat-ground blade crafted from Sandvik 12C27 stainless steel. Specifications Blade Length: 1.67" (42 mm) Cutting Edge: 1.48" (38 mm) Closed Length: 2.06" (52 mm) Overall Length: 3.71" (94 mm) Blade Material: Sandvik 12C27 Stainless Steel Blade Thickness: 0.063" (1.6 mm) Blade Style: Drop Point Blade Grind: Full Flat Blade Finish: Satin Handle Material: Black G10 Locking Mechanism: Slipjoint Pocket Clip: None Weight: 0.40 oz. (10 g) Made in China Spyderco HoneyBee Micro-Size Slipjoint Blue G10 Handles #C137GBLP Quick-View	Spyderco HoneyBee Micro-Size Slipjoint Red G10 Handles #C137GRDP Successfully added to your cart Continue Shopping Process Checkout Spyderco HoneyBee Micro-Size Slipjoint Red G10 Handles #C137GRDP 160.00 AED ~~160.00 AED~~ 160.0 AED Spyderco’s micro-sized slipjoint pocketknives are far more than novelties. Despite their compact size, they are fully functional, impressively sharp, and, thanks to the Trademark Round Hole in their blades, easier to open than knives with traditional nail nicks. Previously offered only with stainless steel handles, the popular Bug, Honeybee, and Grasshopper designs are now available with G10 scales in three colors. The peel-ply textured scales provide enhanced grip and come in black, red, and blue. Each knife features a razor-sharp, full-flat-ground blade crafted from Sandvik 12C27 stainless steel. Specifications Blade Length: 1.67" (42 mm) Cutting Edge: 1.48" (38 mm) Closed Length: 2.06" (52 mm) Overall Length: 3.71" (94 mm) Blade Material: Sandvik 12C27 Stainless Steel Blade Thickness: 0.063" (1.6 mm) Blade Style: Drop Point Blade Grind: Full Flat Blade Finish: Satin Handle Material: Red G10 Locking Mechanism: Slipjoint Pocket Clip: None Weight: 0.40 oz. (10 g) Made in China Spyderco HoneyBee Micro-Size Slipjoint Red G10 Handles #C137GRDP Quick-View	Spyderco GrassHopper Miniature Slipjoint Black G10 Handles #C138GBKP Successfully added to your cart Continue Shopping Process Checkout New Spyderco GrassHopper Miniature Slipjoint Black G10 Handles #C138GBKP 175.00 AED ~~175.00 AED~~ 175.0 AED Spyderco’s micro-sized slipjoint pocketknives are far more than novelties. Despite their compact size, they are fully functional, impressively sharp, and, thanks to the Trademark Round Hole in their blades, easier to open than knives with traditional nail nicks. Previously offered only with stainless steel handles, the popular Bug, Honeybee, and Grasshopper designs are now available with G10 scales in three colors. The peel-ply textured scales provide enhanced grip and come in black, red, and blue. Each knife features a razor-sharp, full-flat-ground blade crafted from Sandvik 12C27 stainless steel. Spyderco GrassHopper Miniature Slipjoint Black G10 Handles #C138GBKP Quick-View	Spyderco GrassHopper Miniature Slipjoint 12C27 Satin Plain Blade, Blue G10 Handles #C138GBLP Successfully added to your cart Continue Shopping Process Checkout New Spyderco GrassHopper Miniature Slipjoint 12C27 Satin Plain Blade, Blue G10 Handles #C138GBLP 175.00 AED ~~175.00 AED~~ 175.0 AED Spyderco’s micro-sized slipjoint pocketknives are far more than novelties. Despite their compact size, they are fully functional, impressively sharp, and, thanks to the Trademark Round Hole in their blades, easier to open than knives with traditional nail nicks. Previously offered only with stainless steel handles, the popular Bug, Honeybee, and Grasshopper designs are now available with G10 scales in three colors. The peel-ply textured scales provide enhanced grip and come in black, red, and blue. Each knife features a razor-sharp, full-flat-ground blade crafted from Sandvik 12C27 stainless steel. Specifications Blade Length: 2.30" (58 mm) Cutting Edge: 2.07" (53 mm) Closed Length: 2.83" (72 mm) Overall Length: 5.13" (130 mm) Blade Material: Sandvik 12C27 Stainless Steel Blade Thickness: 0.079" (2.0 mm) Blade Style: Drop Point Blade Grind: Full Flat Blade Finish: Satin Handle Material: Blue G10 Locking Mechanism: Slipjoint Pocket Clip: None Weight: 0.80 oz. (21 g) Made in China Spyderco GrassHopper Miniature Slipjoint 12C27 Satin Plain Blade, Blue G10 Handles #C138GBLP Quick-View
Spyderco GrassHopper Miniature Slipjoint Folding Knife 2.27" 12C27 Satin Plain Blade, Red G10 Handles #C138GRDP Successfully added to your cart Continue Shopping Process Checkout New Spyderco GrassHopper Miniature Slipjoint Folding Knife 2.27" 12C27 Satin Plain Blade, Red G10 Handles #C138GRDP 175.00 AED ~~175.00 AED~~ 175.0 AED Spyderco’s micro-sized slipjoint pocketknives are far more than novelties. Despite their compact size, they are fully functional, impressively sharp, and, thanks to the Trademark Round Hole in their blades, easier to open than knives with traditional nail nicks. Previously offered only with stainless steel handles, the popular Bug, Honeybee, and Grasshopper designs are now available with G10 scales in three colors. The peel-ply textured scales provide enhanced grip and come in black, red, and blue. Each knife features a razor-sharp, full-flat-ground blade crafted from Sandvik 12C27 stainless steel. Spyderco GrassHopper Miniature Slipjoint Folding Knife 2.27" 12C27 Satin Plain Blade, Red G10 Handles #C138GRDP Quick-View	Spyderco Squeak Folding Knife 2" N690CO Satin Plain Blade #C154PBK Successfully added to your cart Continue Shopping Process Checkout Spyderco Squeak Folding Knife 2" N690CO Satin Plain Blade #C154PBK 365.00 AED ~~365.00 AED~~ 365.0 AED Produced in Maniago, the Squeak SLIPIT is a Spyderco non-locking one-hand open, clip carry folder called a SLIPIT. It's designed for legally-restricted carry in locales where locking folders are prohibited. The blade is ground full-flat and made from Austrian Bohler-Uddeholm's N690Co steel. N690C0 is high-carbon steel with added cobalt for structural uniformity resulting in enhanced edge retention and sharpening receptivity. Textured jimping is machined from the blade's spine and choil for increased slip resistance. The Squeak's blade is held in the open position when cutting by a notched-joint at the knife's pivot. When closing the blade, the notch generates resistance functionally similar to traditional slip-joint penknife and performs the additional function of smoothing the motion of the blade opening. Increasing control and comfort Spyderco designers add a deep finger choil, naturally jogging the index finger into a position on the underside of the blade directly below the thumb. Positioning the index finger in this choil blocks the blade from accidental closing when cutting and provides a grip position that allows the user to choke-up closer to the cutting edge for greater dexterity. The handle is FRN (fiberglass reinforced nylon) and engineered for user comfort whether in the hand, with ergonomic handle texturing, or in the pocket with a reversible tip-up deep pocket wire clip. Specifications Blade Length: 2" (51 mm) Cutting Edge: 1-3/4" (44 mm) Blade Thickness: 1/8" (3 mm) Overall Length: 5-1/32" (128 mm) Closed Length: 3-1/8" (79 mm) Hole Diameter: 15/32" (12 mm) Blade Steel: N690Co Weight: 1.6 oz. (46 g) Handle Material: Black FRN Made in Italy Spyderco Squeak Folding Knife 2" N690CO Satin Plain Blade #C154PBK Quick-View	Spyderco ClipiTool Bottle Opener/Screwdriver Stainless Steel Handles, Slipjoint (non-locking) #C175P Successfully added to your cart Continue Shopping Process Checkout Spyderco ClipiTool Bottle Opener/Screwdriver Stainless Steel Handles, Slipjoint (non-locking) #C175P 235.00 AED ~~235.00 AED~~ 235.0 AED ClipiTool™ knives represent an exciting breed of Spyderco cutting tools that redefine the concept of the multi-function pocketknife. As we all know, pocketknives that combine the cutting performance of a primary blade with one or more other tools are nothing new. Therein lies the problem. Even though most of today's multi-function knives are rendered with modern, high-performance materials, their designs have not evolved significantly since they were first invented centuries ago. In particular, their use of traditional nail nicks as a purchase to open the different tools is inconvenient, slow, and more often than not results in chipped fingernails and frustration. Traditional pocketknives also ride in the bottom of the pocket where they can be difficult to access, get lost among other items, and are vulnerable to lint and pocket trash. ClipiTool knives change all that by integrating many of the features that define Spyderco's revolutionary one-hand-opening folding knives with the concept of the classic multi-blade slipjoint pocketknife. The heart of every ClipiTool is its primary blade, which features a broad profile and a full-flat grind for reliable cutting performance far beyond its size. It also features Spyderco's distinctive Trademark Round Hole™ and a forefinger choil (groove). Although not intended for one-handed operation, the round hole makes two-handed opening of the non-locking, slipjoint blade much easier. The forefinger choil allows a secure grip that puts your hand close to the cutting action and enables the index finger to act as a natural stop to prevent accidental closure of the blade. The ClipiTool knife's primary cutting blade is accompanied by a secondary tool that also folds conveniently into the handle via a non-locking slipjoint mechanism. Currently these tools include a choice of scissors, a serrated blade, or a combination bottle opener/flat-bladed screwdriver. Like the main blade, these tools all include Trademark Round Holes that support an easy pinch grip of the thumb and index finger for quick, positive two-handed opening. ClipiTool knives are constructed entirely of corrosion-resistant stainless steel and feature superior fit, finish, and attention to detail. They also include a handy clip allowing them to be clipped to the top of a pocket or similar location to keep them instantly accessible and free from pocket lint and other debris. This clip also enables ClipiTools to function as money clips if carried inside the pocket. Compact, convenient, and extremely versatile, ClipiTool knives are also very affordable and future models are already in the works. More than 30 years ago, Spyderco redefined the lock-blade folding knife. Our newest breed of tools does the same thing for the multi-function slipjoint pocketknife. ClipiTool knives—The evolution of revolution. Features Precision all-stainless-steel construction with superior fit, finish, and attention to detail Pocket clip for convenient carry and easy access Broad, full-flat-ground blade offers unrivaled cutting performance for its size Non-locking slipjoint blade has a forefinger choil for safety during use User-friendly Trademark Round Hole in blade and tool for easy two-handed opening Handy, non-locking secondary tools easily tackle other everyday tasks Specifications Blade Length: 2" (51 mm) Cutting Edge: 1.75" (44 mm) Overall Length: 4.57" (116 mm) Closed Length: 2.57" (65 mm) Blade Thickness: 0.079" (2 mm) Hole Diameter: 0.035" (8.9 mm) Blade Material: 8Cr13MoV Handle Material: Stainless Steel Locking Mechanism: Slipjoint Weight: 1.9 oz. (54 g) Made in China Spyderco ClipiTool Bottle Opener/Screwdriver Stainless Steel Handles, Slipjoint (non-locking) #C175P Quick-View	Spyderco Para 3 Folding Knife S110V Satin Plain Blade, Blurple G10 Handles Compression Lock #C223GPDBL Successfully added to your cart Continue Shopping Process Checkout New Spyderco Para 3 Folding Knife S110V Satin Plain Blade, Blurple G10 Handles Compression Lock #C223GPDBL 1,250.00 AED ~~1,250.00 AED~~ 1250.0 AED Easily one of the most anticipated products in Spyderco's history, the Para 3 is the latest generation of their immensely popular Paramilitary family of folding knives. It traces its history all the way back to the first-generation Paramilitary model, which was introduced in 2004 and even further to that knife's inspiration: the iconic Military Model. The original design intent of the Paramilitary was to provide the same proven reliability and cutting performance of the Military but in a more compact, easy-to-carry package. The design also showcased Spyderco's patented Compression Lock—a high-strength lock mechanism housed in the spine of the handle that offered a number of significant advantages over the Military's liner lock. In keeping with Spyderco's deep commitment to Constant Quality Improvement (C.Q.I.), in 2010 the Paramilitary was redesigned to yield the Paramilitary 2. This second-generation design incorporated an improved lock detent, refined ergonomics, countersunk handle and pivot screws, and a four-position clip that supports all possible carry configurations. These enhancements quickly established the "Para 2" as one of Spyderco's most popular and in-demand models and, to many end users, the "perfect" folding knife. While it was significantly smaller than the Military Model that inspired it, for some customers it was still larger than what they could comfortably or legally carry. Based on that feedback, Spyderco went back to the drawing board once again to distil all the features, benefits, and performance of the Paramilitary 2 into a "sub-compact" package built around a three-inch blade. The result is the Para 3. Although clearly based on the Paramilitary 2, the Para 3 was not named the "Paramilitary 3" because its smaller size qualifies it as a different knife design. Similarly, the "3" in its name actually reflects its three-inch blade length rather than identifying it as a third-generation of the Paramilitary design. While its pedigree is unmistakable, the Para 3 (and its model and SKU number) has its own distinct "identity" as a Spyderco product. With that said, the Para 3 does faithfully retain all the defining features of the best-selling Paramilitary 2, but in a smaller, even handier package. Its three-inch blade is precision machined from premium CPM-S110V particle metallurgy stainless steel and features a full-flat grind for superior edge geometry and low-friction cutting performance. Its oversized Trademark Round Hole proudly announces the knife's pedigree and is easily accessible from either side to allow swift, ambidextrous, one-handed opening. The lightweight, open-backed handle is built on a framework of stout stainless steel liners nested within textured G10 scales. This refined construction style maximizes both structural strength and ergonomics while keeping the handle slim and pocket-friendly. It's also the foundation of the knife's patented Compression Lock mechanism, which provides exceptional lock strength, yet allows easy one-handed closing without placing your fingers in the path of the blade's edge. A streamlined four-position hourglass clip and a generously sized lanyard hole round out the design, offering a choice of left or right-side tip-up or tip-down carry and allowing the easy attachment of lanyards or fobs. The Para 3 is a remarkably refined folding knife with a distinguished history. It's also a shining example of our tireless quest for perfection and our deep commitment to meeting our customers' needs. Specifications Blade Length: 3.0" Closed Length: 4.27" Overall Length: 7.27" Cutting Edge: 2.63" Blade Thickness: 0.150" Blade Material: CPM-S110V Stainless Steel Blade Style: Clip Point Blade Grind: Full Flat Blade Finish: Satin Blade Edge: Plain Handle Material: G10 Handle Color: Blurple Locking Mechanism: Compression Pocket Clip: Tip-Up/Down, Left/Right Carry Model Number: C223GPDBL Model Name: Para 3 CPM-S110V Weight: 3.4 oz. Made in the USA Spyderco Para 3 Folding Knife S110V Satin Plain Blade, Blurple G10 Handles Compression Lock #C223GPDBL Quick-View
Spyderco Lil' Native Compression Lock SPY27 Satin Plain Blade, Cobalt Blue G10 Handles #C230GPCBL Successfully added to your cart Continue Shopping Process Checkout Spyderco Lil' Native Compression Lock SPY27 Satin Plain Blade, Cobalt Blue G10 Handles #C230GPCBL 850.00 AED ~~850.00 AED~~ 850.0 AED Distilling the functionality of the iconic Native 5 into a smaller, more pocket-friendly package, the popular Lil' Native is sized to be legally compliant almost everywhere. Now available with Spyderco's own CPM-SPY27 blade steel, it features an advanced alloy formula bolstered by the benefits of Crucible's CPM particle metallurgy process, offering a superior balance of corrosion resistance, toughness, and edge retention. The full-flat-ground 2.5-inch blade capitalizes on these properties to provide outstanding cutting performance and reliability. It is supported by stainless steel liners that form the foundation of the knife's stout Compression Lock mechanism and its easy-to-clean open-backed construction. The liners are nested into peel-ply-textured G10 scales boasting the signature cobalt-blue color of Spyderco's SPY27 family of knives. Specifications Blade Length: 2.42" (61 mm) Cutting Edge: 2.02" (51 mm) Closed Length: 3.47" (88 mm) Overall Length: 5.89" (150 mm) Blade Material: CPM-SPY27 Stainless Steel Blade Thickness: 0.125" (3.2 mm) Blade Style: Leaf-Shaped Blade Grind: Full Flat Blade Finish: Satin Handle Material: Cobalt Blue G10 Locking Mechanism: Compression Lock Pocket Clip: Tip-Up, Right/Left Carry Weight: 2.5 oz. (71 g) Made in the USA Spyderco Lil' Native Compression Lock SPY27 Satin Plain Blade, Cobalt Blue G10 Handles #C230GPCBL Quick-View	Spyderco Marcin Slysz Techno 3 Flipper Knife #C158TIP3 Successfully added to your cart Continue Shopping Process Checkout Spyderco Marcin Slysz Techno 3 Flipper Knife #C158TIP3 1,550.00 AED ~~1,550.00 AED~~ 1550.0 AED Since 1990, Spyderco has been honored to work with some of the world’s finest custom knifemakers in the production of "collaboration" models. These factory-made knives faithfully translate the distinctive designs and meticulous craftsmanship of these makers' coveted custom pieces into exceptional production knives available to all. One of Spyderco's most popular and prolific collaborators has been Polish knifemaker Marcin Slysz. As of November of 2024, Spyderco has produced five of his designs and are proud to announce the release of the sixth—the Techno 3. Techno Evolution As its name implies, the Techno 3 is a third-generation expression of this model. The original Techno was introduced in 2012 and was the first of Slysz' collaborations with Spyderco. Its compact, extremely capable design quickly found favor with Spyderco's followers. It also gave them an appreciation for Slysz' painstaking craftsmanship and whet their appetite for more of his work. One of the responses to that demand was the Techno 2. Introduced in 2018, it also packs tremendous strength and utility into a compact package but is more streamlined and pocket friendly. Like its predecessor, the Techno 2's stonewash-finished blade is crafted from Carpenter Technology's CTS XHP stainless steel, but its thickness has been reduced from 4.5mm (0.177 inch) to 3.5mm (0.138 inch). Its high saber grind maintains a full-thickness spine for strength while offering enhanced edge geometry for low-friction cutting performance. The blade's refined, near-sheepfoot profile also provides enhanced point utility and cutting leverage compared to the original drop-point design. Thoughtfully placed jimping (textured grooves) on the thumb ramp offers an excellent purchase for maximum control during use and our signature Trademark Round Hole allows swift, positive one-handed opening. The Techno 2's handle is constructed with two precision-machined 6AL-4V titanium scales joined by green-anodized titanium standoffs. This creates an open-backed construction style that reduces overall weight and allows easy cleaning and maintenance. The reverse-side scale forms the foundation of the knife's stout Reeve Integral Lock (R.I.L., aka "frame lock") mechanism, which locks the blade securely open during use, yet can be easily released with one hand. Since users of small knives often like to accessorize them with lanyards and fobs, the Techno 2's handle also includes a generously sized lanyard hole. Both handle scales feature a handsome stonewashed finish and are machined to accept the knife’s deep-pocket wire clip, which is easily reversible to support left or right-side tip-up carry. The Techno 3 While the Techno 2 is still an extremely popular member of the Spyderco product line, when Marcin Slysz revealed his "Mouse 3" custom design, fans of his work immediately voiced their desire to see it expressed by Spyderco as well. The response to that calling is the Techno 3. Manufactured for Spyderco in Maniago, Italy, the third-generation Techno 3 is an elegant synthesis of practicality and style. It faithfully translates all the key qualities of Slysz' coveted custom folder into a practical, affordable, factory-made knife. It also showcases distinctive features that set it apart from earlier generations of the design and Slysz' other Spyderco collaborations. While both its predecessors showcased a large Trademark Round Hole in the blade for one-handed opening, the Techno 3 features an index-finger "flipper" opener. Despite its understated size, it offers excellent leverage and is supported by ball bearing pivot washers that ensure a smooth, frictionless action. True to our trademark, the blade still incorporates a small Round Hole as a proud symbol of the Spyderco brand. The Techno 3's blade is crafted from CTS XHP—a premium American-made stainless steel that combines the corrosion resistance of 440C and the edge retention and toughness of D2. It is also produced using Carpenter’s Micro-Melt powder metallurgy process, which ensures an extremely fine microstructure and uniform distribution of the elements throughout the steel. Taking full advantage of these properties, the Techno 3's blade features a high flat grind and a stylish swedge (unsharpened bevel) that provide low-friction cutting performance, excellent point utility, and unmistakable style. The knife's handle features precision-machined solid titanium scales joined by a titanium backspacer. The reverse-side scale serves as the foundation of its high-strength R.I.L. mechanism, which includes a stainless steel interface. This premium feature creates steel-to-steel contact between the lock bar and the ramp on the blade’s tang, ensuring a solid lock-up, a smooth action, and a long service life. It also does double duty as an overtravel stop to prevent weakening of the lock bar’s spring tension with repeated use. Unlike the flat scales of its predecessors, the Techno 3’s intricately machined, matte-finished scales include faceted chamfers that enhance the knife’s ergonomics and give it exceptional style. To ensure ease of carry and instant access, the Techno 3 showcases a beautifully machined titanium pocket clip configured for right-side, tip-up carry. The clip is also attached with internal screws to accentuate the knife’s sleek, high-tech styling. The latest offering from one of Spyderco's most popular and prolific designers, the Techno 3 proudly delivers the style and craftsmanship of Marcin Slysz' prized custom knives in a practical, affordable format. Specifications Blade Length: 2.64" (67 mm) Cutting Edge: 2.48" (63 mm) Closed Length: 3.70" (94 mm) Overall Length: 6.32" (161 mm) Blade Thickness: 0.127" (3.2 mm) Blade Material: CTS-XHP Stainless Steel Blade Style: Sheepsfoot Blade Grind: Flat Blade Finish: Satin Blade Edge: Plain Handle Material: Chamfered Titanium Handle Color: Gray Locking Mechanism: Frame Lock Pocket Clip: Tip-Up, Right Carry Model Number: C158TIP3 Model Name: Techno 3 Weight: 3.3 oz. (93 g) Designer: Marcin Slysz Made in Italy Spyderco Marcin Slysz Techno 3 Flipper Knife #C158TIP3 Quick-View	PARA 3 LIGHTWEIGHT BROWN CPM 15V SPRINT RUN #C223PBN15V Successfully added to your cart Continue Shopping Process Checkout New PARA 3 LIGHTWEIGHT BROWN CPM 15V SPRINT RUN #C223PBN15V 795.00 AED ~~795.00 AED~~ 795.0 AED Spyderco Para 3 Lightweight (C223PBN15V) - 2.92in Stonewash CPM-15V Plain Blade, Brown FRN Handle This limited-edition Sprint Run offers CPM-15V Steel. The blades of this elite family of knives are further enhanced by specialized heat-treating protocol. Specifically tuned to each “melt” of CPM-15V, this painstaking process maximizes the extraordinary properties of this steel to yield blade capable of extreme sharpness and unparallel edge retention. To distinguish these remarkable knives even further, they feature a brown FRN handle. . Specifications: Product Type Folding Knife Brand Spyderco Product Name Para 3 Lightweight CPM 15V Sprint Run Model # C223PBN15V Overall Length (in) 7.20 Closed Length (In) 4.29 Blade Length (in) 2.93 Blade Thickness (in) .145 Blade Material CPM-15V Blade Style Leaf Shape Blade Edge Plain Blade Grind Full-Flat Blade Finish Stonewash Handle Material FRN Handle Finish Textured Handle Color Brown Lock Type Compression Lock Clip Position Tip-up, Tip-down/ Left, Right carry Weight (oz) 2.4 Origin USA Blade Range 2-2.99 PARA 3 LIGHTWEIGHT BROWN CPM 15V SPRINT RUN #C223PBN15V Quick-View	Spyderco Military 2 Sprint Run S90V Satin Plain Blade, Carbon Fiber Handles #C36CFP2 Successfully added to your cart Continue Shopping Process Checkout New Spyderco Military 2 Sprint Run S90V Satin Plain Blade, Carbon Fiber Handles #C36CFP2 1,620.00 AED ~~1,620.00 AED~~ 1620.0 AED Blade Length: 4.00" (102 mm) Closed Length: 5.51" (140 mm) Overall Length: 9.51" (242 mm) Cutting Edge: 3.65" (93 mm) Blade Thickness: 0.145" (3.7 mm) Blade Material: CPM-S90V Stainless Steel Blade Style: Clip Point Blade Grind: Full-Flat Blade Finish: Satin Blade Edge: Plain Handle Material: Carbon Fiber Handle Color: Black Locking Mechanism: Compression Lock Pocket Clip: Tip-Up/Down, Left/Right Carry Model Number: SP36CFP2 Model Name: Military 2, Sprint Run Weight: 4.40 oz. (124 g) Designers: Sal and Eric Glesser Made in the USA Spyderco Military 2 Sprint Run S90V Satin Plain Blade, Carbon Fiber Handles #C36CFP2 Quick-View